Description
The Multiple pulses apparatus reference design is part of the 3DOptix time-resolved spectroscopy reference designs. The apparatus enables a wide range of accurate and modular ways to measure and resolve ultrafast processes in atomic, molecular and condensed matter systems using ultrafast laser systems. The design provides the capability to perform multi-dimensional spectroscopies and can serve as a basis for multiphoton imaging systems.
The Multiple pulse-sequences configurations apparatus can be used for multiple pump-probes experiments and multiphoton nonlinear spectroscopy, such as 2D spectroscopy.
The multiple pump probe technique is a widely used ultrafast spectroscopy method allowing the study of ultrafast dynamics of light-matter interactions. This method uses two and more light pulses, typically of different wavelengths and intensities, which are spatially overlapped with high precision and whose relative time delay is controlled with a delay line capable of micrometric translation. The nominal paths taken by the pump and the probe need to be determined to an extremely high degree of accuracy. The optomechanical requirements for such setups are high and the alignment is tedious and demanding.
3DOptix Multiple pulses apparatus reference design allows the user to build multiple pump-probe configurations in record time with minimal alignment necessary. The reference designs are based on the BreadBox™ platform and its modular and versatile optomechanical mounts and adaptors. 3DOptix devices are modular robust and can be easily reconfigured. Once the reference designs are assembled they can be moved around as a unit while maintaining the accuracy of the device.
An example of 4 pulses-sequence configuration:
The left figure shows the multiphoton pulse configuration, whereas in the right image we see the multiple pump probes configuration. Note: as the illustration is two-dimensional, some of the optical paths occur in a different level of the propagation paths.
With the following easy-to-use instruction manual and its associated instructional video, suited for optical elements of Ø1″/25mm, you can focus on experiments and not on alignments
We offer the following designs for 3-pulses/4-pulses/5-pulses/6-pulses apparatuse. The number of pulses designs in the table below can be extended to any N-Pulses apparatues
Part Number | Multiple pulses apparatus Ø1″/25mm | Price per unit | Number of pulses | |||||||||
| 3 | 4 | 5 | 6 | 7 | ||||||||
| Qty | Price | Qty | Price | Qty | Price | Qty | Price | Qty | Price | |||
| 20020 / 20020-M | Premium Box Frame – Floor/ceiling 9 (3X3) mount locations | $95 | 2 | $190 | 4 | $380 | 4 | $380 | 4 | $380 | 6 | $570 |
| 20012 / 20012-M | Premium Box Frame – Wall frame 3 (1X3) mount locations | $72 | 5 | $360 | 6 | $432 | 7 | $504 | 8 | $576 | 9 | $648 |
| 20100 / 20100-M | Fixed Mount – Triangular Ø1″/25mm Mirror/DM Mount | $59 | 6 | $354 | 8 | $472 | 10 | $590 | 12 | $708 | 14 | $826 |
| 20200 / 20200-M | Triangular Kinematic Mirror Mount Ø1″/25mm | $125 | 6 | $750 | 8 | $1,000 | 10 | $1,250 | 12 | $1,500 | 14 | $1,750 |
| Total | 1,654$ | 2,284$ | 2,724$ | 3,164$ | 3,794$ | |||||||
Included Hardware and Screws | Qty | Qty | Qty | Qty | Qty | ||||||
| Imperial: 4-40 Cap Screw, 1/4″ Long | 45 | 62 | 73 | 84 | 101 | ||||||
| Metric: M2.5-0.45mm Cap Screw 6mm Long | |||||||||||
| 2.5mm 18-8 Stainless Steel Dowel Pins | 24 | 32 | 40 | 48 | 56 | ||||||
| Aluminum Unthreaded Spacer – 1/8″ Long, 5/8″ Outside Diameter | 6 | 8 | 10 | 12 | 14 |
| Recommended third party optical/optomechanical elements | Qty | Qty | Qty | Qty | Qty | ||||||
| Metallic/Dielectric mirrors | 8 | 10 | 12 | 14 | 16 | ||||||
| Ø1″/25mm Beamsplitter 45° AOI | 4 | 6 | 8 | 10 | 12 | ||||||
| Iris Mount Ultimate – 20502 / 20502-M | 1 | 1 | 1 | 1 | 1 | ||||||
| Threaded Iris Diaphragm, SM1 (1.035″ – 40) | 1 | 1 | 1 | 1 | 1 | ||||||
| 1″ Lens Tube ; SM1 (1.035″ – 40) | 2 | 2 | 2 | 2 | 2 | ||||||
| Retaining Ring, SM1 (1.035″ – 40) | 2 | 2 | 2 | 2 | 2 | ||||||
| Fluorescing Alignment Disks | 2 | 2 | 2 | 2 | 2 | ||||||
| Travel Linear Translation Stage compatible with manual and motorized heads for 1″ translator height – Spacers/Washers are provided as part of the reference design. Translator + Spacers/Washers height should be – 1.125” / 28.12mm | 3 | 4 | 5 | 6 | 7 |
Reviews
There are no reviews yet.